Dashboards by role: GM
The General Manager Dashboard for Home Services: Today, This Week, Every Business Unit
The owner asks how the month is going. The general manager has to know who covers Thursday, which sold installs have no date, and why plumbing booked half its hours. That takes a different screen, cut by business unit and limited to today and this week.
November 12, 2026 · 10 min read
- Week view: HVAC service, HVAC install, plumbing
- HVAC install: 3 sold estimates with no install date
- Plumbing: Thursday 96% of shift hours booked
- HVAC service: Wednesday 41% booked, 22 members due
- Recalls this week: 2, both tied to original jobs
- Past due over 60 days: 4 invoices, $7,820
- Booked since Monday: 112 of 158 lead calls
The short answer
A general manager dashboard shows today and this week by business unit: booked hours against available hours, jobs booked, sold estimates not yet scheduled, open estimates, recalls and past-due receivables. Built on your ServiceTitan data through the API, each panel states its definition and opens its list, so the GM acts on it instead of exporting it. DataCram builds one from $575 plus hosting.
On this page
- The owner's screen is about the month. The GM's is about Thursday.
- Seven panels, two time frames, one list behind each
- Business units: the filter that quietly changes every total
- Sold on Monday, installed when? The gap a GM owns
- Receivables when the API offers no aging report
- A Monday meeting that ends on time
- Cost, ServiceTitan's rules, and when a GM should skip this
The owner's screen is about the month. The GM's is about Thursday.
A general manager lives two weeks wide. Last month is the owner's worry and next quarter is a meeting. What matters is whether Thursday is overbooked in heating and empty in plumbing, whether the replacement sold on Monday has an install date, and whether Tuesday's recall went back to someone who can fix it. A revenue bar chart, however handsome, answers none of that. The owner's morning check is narrower still, and we wrote it up as six ServiceTitan numbers to read before coffee.
ServiceTitan has the facts. It also has a great many screens. Its dashboards home article, as read in November 2026, lists business, call and CSR metric modules, a ZIP code heat map, and prebuilt dashboards for commercial, construction and roofing work. GMs tell us the hard part is not finding a number but seeing the same seven numbers, filtered the same way, every morning without rebuilding the view.
A GM dashboard does that one job. It is one of the role screens in our ServiceTitan dashboards section, built through our custom dashboard service on data read from your own account. The owner's version is cut for a different person with a longer horizon, and the two can share definitions so nobody argues about which one is right.
Seven panels, two time frames, one list behind each
Every panel has a today view and a this-week view, and every number opens the rows behind it. Nothing older than last week appears unless the GM asks. Here is where we start; the panels change to fit how your company is organized.
| Panel | Today | This week | The list behind it |
|---|---|---|---|
| Capacity | Booked hours against shift hours, per business unit | The same, day by day through Sunday | Days and units that are full or thin, from the capacity dashboard |
| Booked | Jobs booked today, by business unit and job type | Jobs booked since Monday against the same week last year | Each job with its campaign and the CSR who booked it |
| Sold, not scheduled | Estimates sold today with no install appointment | All of them, aged by days since the sale | Customer, amount, salesperson and phone number |
| Unsold estimates | Estimates presented today and still open | Open estimates from this week, by technician | Oldest first, each with a named person to follow up |
| Recalls | Recall jobs created today | Recalls this week, each tied to the original job | Original technician, job type and notes |
| Receivables | Invoices that fell due today unpaid | Past-due balances grouped by age | The five largest, with the last payment date |
| Missed calls | Abandoned and unbooked lead calls today | The same, by hour of day | Recordings and call reasons, from the call center dashboard |
Seven panels fit on one laptop screen without scrolling. We keep that limit on purpose. A GM who has to scroll to find recalls will, within a month, stop finding recalls. Anything that does not fit is a link to the screen where it lives, not another tile squeezed into a corner.
Business units: the filter that quietly changes every total
Most GMs run the company by business unit: HVAC service, HVAC install, plumbing, perhaps electrical. ServiceTitan counts business units differently depending on the number, and its help center says so plainly. The Business Unit Performance template article, as read in November 2026, says revenue KPIs "are based on the BU of the invoice item," while its timesheet fields note that "BU filters correspond to job BU." The CSR metrics article adds: "BU filters apply to job booking KPIs. Call and lead KPIs are unaffected."

In practice, a plumbing line item on an HVAC job counts as plumbing revenue while the hours stay with HVAC. A technician can appear on two scorecards; ServiceTitan's scorecard article explains that by default an item takes "the job's business unit, not the technician BU." None of this is an error. It does mean a GM screen must say, on each panel, which business unit rule it follows:
- Revenue panels follow the invoice item's business unit, the same way ServiceTitan's reports do.
- Hours and capacity panels follow the job's business unit or the technician's, and the panel names which.
- Call panels show company-wide counts, because ServiceTitan's call and lead KPIs ignore the business unit filter.
- The filter stays put. ServiceTitan's dashboard filter article says applied filters are not saved when the browser refreshes. On a custom screen, the GM's business units are part of the layout.
Sold on Monday, installed when? The gap a GM owns
The costliest number on a GM's screen is often the one nobody tracks: work that is sold and not scheduled. ServiceTitan dates sales and revenue on different fields. Its dashboard business metrics article, as read in November 2026, says "The metrics related to sales all use the date filter of Estimate Sold On Date," while "Most of the metrics related to revenue share the date filter of Job Completion Date." Among its reasons Total Sales and Completed Revenue can differ is an estimate sold in the range whose install job "has not been completed."
That gap is a list, and the GM owns it. A sold replacement with no install date is a customer waiting for a call, a deposit on the books and a crew's week that could be full. The panel shows every sold estimate without a scheduled appointment, oldest first, with the salesperson and the customer's number. The figure at the top is simply the length of that list.
What ServiceTitan already gives a GM
- The Modular Dashboard's daily snapshot of revenue, sales, booking and conversion rates
- Scheduled reports by email as PDF or XLSX, filtered per recipient or identical for everyone
- Custom dashboards with KPI modules of up to six KPIs, on packages that include them
- Technician and CSR scorecards, once the account is configured for them
What a GM dashboard adds
- Today and this week only, by the GM's own business units, with no re-filtering
- A sold-not-scheduled list with phone numbers
- Each panel's definition, date field and business unit rule printed on it
- Recalls tied to the original job and technician
The left column comes from ServiceTitan's help center as read in November 2026, including its scheduled reports article. Scheduled reports are underrated, and some GMs need nothing more. One failure is worth checking for: ServiceTitan records a case where a report "did not arrive because the system sent it to an inactive employee profile instead of the active one with the same name."
Receivables when the API offers no aging report
Past-due money matters to a GM because the office chases it and the technicians hear about it at the next visit. ServiceTitan's Accounting API document, as read in November 2026, gives each invoice an invoiceDate, a dueDate, a balance and a paidOn date, but no accounts-receivable aging endpoint appears in it. So aging on a custom screen is computed: balance above zero, days past the due date, grouped into buckets you choose. We label it as computed and check it against ServiceTitan's own AR reports for a month.
The GM panel stays small: what fell due today, what is past due, and the five largest balances with a phone number beside each. The fuller picture, with deposits and completed jobs not yet invoiced, belongs on the cash and receivables dashboard, which a bookkeeper or owner usually reads. Splitting it this way keeps the GM screen about action, not accounting.
A Monday meeting that ends on time
The weekly operations meeting is where dashboards go to be argued with. Someone brings an export. Someone else brings a different export. Twenty minutes later the room agrees the numbers are confusing and adjourns. The fix is dull and it works: one screen, definitions printed on it, and an agenda that follows the panels in order.
- 1
Capacity first
Which days next week are thin, and in which business unit. Decide whether to call members due for maintenance or ask marketing for more calls.
- 2
Sold, not scheduled
Go down the list. Every row leaves the room with a name and a day.
- 3
Recalls
Each one beside its original job. Look for a pattern in job type, part or technician; the callback rate guide covers fair counting.
- 4
Open estimates
The oldest ten get an owner. Close rate trends live on the technician scorecard; this panel is about follow-up, not grading.
- 5
Receivables
Only the large balances and anything over 60 days. The rest is the office's normal work.
Once a month, the numbers review steps back: we sit with the GM and the owner, walk through what moved, and agree what to change. Weekly is for lists. Monthly is for causes.
Cost, ServiceTitan's rules, and when a GM should skip this
A GM dashboard costs from $575 to build, depending on complexity, as of November 2026, and you get a fixed written estimate before work begins. Seven panels for one location sit near the floor; several locations, extra systems or detailed permissions push it up. Hosting starts at $55 a month. The API connection to ServiceTitan goes live the same day. The monthly numbers review starts at $575 a month, with no long contract.
ServiceTitan's rules apply to any app reading its data. Its Developer Portal, as read in October 2026, says customer-built apps need the "Works or Ent Plus package," and its API Terms of Use, last updated April 15, 2026, cap storage of API content at 24 hours except where the terms or documentation allow. Check your own agreement. Our API data page explains how a dashboard works inside those limits.
DataCram, a web studio in San Antonio, Texas, has built for the web since 1999 and works with companies across the US by phone, video and a shared project page. We are not affiliated with ServiceTitan. If you are leaving ServiceTitan rather than staying, read about a dispatch board of your own. Otherwise, send us the reports your GM runs on Monday and we will tell you which panels you already have. Learn who we are or call (210) 346-0848.
Questions owners ask about ServiceTitan dashboards and numbers
Today and this week, by business unit: booked hours against available hours, jobs booked, sold estimates without an install date, open estimates, recalls, past-due receivables and missed calls. Each panel should open its list of jobs, calls or invoices. Monthly revenue trends belong on the owner's screen; the GM's screen is about what to do before Friday.
Because ServiceTitan assigns business units differently by metric. Its help center, as read in November 2026, says revenue KPIs follow the invoice item's business unit, timesheet fields follow the job's, and CSR call and lead KPIs ignore the business unit filter altogether. All three are correct for what they measure. A GM dashboard states which rule each panel uses.
Yes. It reads sold estimates and the jobs and appointments tied to them through ServiceTitan's API, then lists every sale with no install appointment, oldest first, with the salesperson and the customer's number. It tends to be the most actionable panel on the screen, because each row is a customer who has already said yes and is waiting for a date.
From each invoice's due date and remaining balance, both of which ServiceTitan's Accounting API returns. Balances above zero are grouped by days past due into buckets you choose. The panel is labeled as computed, and we check it against ServiceTitan's own AR reports for a month. The cash and receivables dashboard goes further.
Share the definitions, not the screen. The owner wants a month-wide view and a few money figures; the GM wants today and this week by business unit, with lists to work. When both screens use the same counting rules, a number on one never contradicts the other, which ends most Monday arguments before they start.
From $575, depending on complexity, as of November 2026, with a fixed written estimate before work starts, plus hosting from $55 a month. The API connection goes live the same day. A monthly numbers review with the GM and owner is from $575 a month, with no long contract.
Keep reading
- Dashboards by role: ownerA ServiceTitan Owner Dashboard for 7:45 a.m.: Eight Numbers, Each With Its List Behind ItThe eight numbers a home service owner checks before 8 a.m., read from your ServiceTitan account, each defined and one click from its list. From $575.
- Dashboards by role: dispatchA Capacity Dashboard on ServiceTitan Data: Booked Hours Against Open Hours, 7 and 30 Days OutBooked hours against available hours for the next 7 and 30 days, by skill, zone and business unit, read from your ServiceTitan account. From $575 to build.
- Module: booking and dispatchA Booking and Dispatch Board You Own: Who Is Where, What Is Next, and Why It Is the Hardest Module to BuildA custom booking and dispatch dashboard: every tech's day on one screen, drag to reassign, honest about the work. From $575 to build, by complexity.
- The build, in fullA Custom ServiceTitan Dashboard for One Role, With the List Behind Every NumberA custom ServiceTitan dashboard for one role: written definitions, a visible refresh time, lists one click away. From $575, hosting from $55 a month.
- Once a month, out loudThe Monthly ServiceTitan Numbers Review: What Moved, Why It Moved, and What Changes on MondayA monthly numbers review for ServiceTitan owners and managers: what moved, why, and what to do next. From $575 a month, no long contract, honest about fit.
- Dashboards by role: CSRsA ServiceTitan Call Center Dashboard That Says Which Booking Rate It MeansCalls, booking rate by CSR, lost calls and after-hours calls on your ServiceTitan data, with every definition on screen. From $575 to build plus hosting.
- Everything in ServiceTitan DashboardsSee the section
From the Insights desk
- The Leads Are Weak: What Glengarry Glen Ross Gets Backwards About Home Service CompaniesHome service owners quote the movie and complain about the leads, then close nearly every real homeowner who calls. The close was never the problem. The stack on the desk is. Where the good leads actually come from, why purchased ones feel weak, and how to own the board instead of racing for scraps.
- Why Your Trade Pages Rank on Page ThreeSearch Console says Google shows your service page, just on page three. Six reasons contractor pages stall in the twenties and thirties, what Google's own guidance says about each, and a one-month plan to move one trade up.
Get the GM's week on one screen
Tell us your business units and the reports your GM runs today. A person at DataCram replies with what a GM screen would show, what you already have, and a fixed written estimate if you want one.
Which of these sounds like you? (pick any)
Rather talk now? Call (210) 346-0848.