Module: marketing dashboard
A Contractor Marketing Dashboard That Ends at Revenue: Spend, Calls, Booked Jobs and Paid Invoices by Source
Clicks are cheap to count and expensive to believe. A marketing dashboard worth its build follows each dollar past the click, through the phone call and the booked job, to the invoice someone actually paid, and it does that inside software you own.
November 11, 2026 · 9 min read
44 good leads never booked; the unbooked call recordings say why
The short answer
A contractor marketing dashboard follows each source from spend to calls and forms, to booked jobs, to completed revenue, and divides spend by booked jobs to get cost per booked job. In your own web app, the call record, the booking and the invoice share one database, so joining them needs no add-on. DataCram builds the module from $575, depending on complexity.
On this page
- The monthly report that stops at the click
- Five links between a dollar and a deposit
- Catching the source before the phone rings
- Handing the result back to the ad platforms
- A sample month, read the way an owner should read it
- What the marketing module costs to build and to run
- Who should build this, and who should wait
The monthly report that stops at the click
It arrives on the fifth. Impressions are up. Click-through rate is up. There is a chart of something called engagement, rising gently to the right like a hot air balloon. On page nine, in small type, cost per lead. Nowhere is the only question a contractor asks about marketing: how many jobs did that money book, and what did those jobs pay?
The answer is not hidden. It is scattered. Spend lives in the ad accounts. Calls live in the phone system. Bookings live in the schedule. Revenue lives in invoicing, weeks later. A marketing dashboard is the screen that joins those four places by source, and it only works if the source was captured at the start.
ServiceTitan does a real version of this. Its Google Ads integration article, as read in October 2026, describes a "ServiceTitan Completed Jobs Conversion Action" that sends a completed job's "Total Revenue" back to Google as the conversion value, and its Marketing Pro page promises "visibility into true ROI on your Google ad campaigns." If you are staying, our guide to ServiceTitan marketing attribution shows how to feed that system properly. This page is about owning the chain yourself.
Five links between a dollar and a deposit
Attribution breaks at whichever link nobody owns. In a custom app, each link is a record in your own database, written at the moment it happens, with the source attached. The table shows what gets captured and where the chain usually snaps.
| Stage | What the app records | Where it usually breaks |
|---|---|---|
| Spend | Daily cost per campaign from each ad platform, plus fixed costs you enter, such as postcards or a home show booth | Costs for offline channels never get typed in, so they look free |
| Lead | Every call, form, chat and online booking, with source, landing page, click ID and campaign tags | A form emails a shared inbox and the source dies there |
| Booked job | The scheduled job, linked to the lead that produced it | The office books from a callback and the link to the first call is lost |
| Completed job | Status, technician, job type and invoice total | A cancellation is never marked, so the job counts as booked forever |
| Revenue collected | Payments received against that invoice | A replacement sold months later is credited to the wrong month's ads |
The second row decides everything else. That is why the online booking module and the call tracking module write the source onto the lead the moment it arrives, and why a dashboard built on a system that drops the source is a very expensive way to draw a question mark.
Catching the source before the phone rings
If most of your work arrives by phone, the trouble is that a phone number carries no referrer. The fix is a different number per source, swapped onto the website for visitors from each channel. Google does a free version for its own ads. Google Ads Help, as read November 10, 2026, says its website call conversions use "dynamically-generated Google forwarding numbers that replace your business number on your site," that it counts a call when it "lasts longer than a minimum length you set," and that "Only one number can be tracked on a single page using the default Javascript tag."

For every other channel you need numbers of your own, rented or built. Renting is a fair choice. CallRail's pricing page, read November 10, 2026, lists its entry plan, Lead Tracking, at "50/mo" on yearly billing, or 55 a month billed monthly, "plus additional usage," as of November 2026. Building it into your own app means the numbers bill at carrier cost and the call record lands in the same database as the job.
- Web forms and bookings carry the landing page, referrer, campaign tags and any click ID into the lead record, so nobody retypes them.
- Google click IDs get stored with the lead. Google Ads Help, as read in October 2026, says you store the GCLID with the lead and later give it back with the conversion details.
- Postcards, wraps and yard signs each get their own tracking number or short web address, so offline spend has somewhere to land. The email marketing module tags its campaigns to past customers the same way.
- Referrals and repeat customers are asked at booking, and the answer is a menu, not a free-text box that fills with "Google" and "a neighbor."
Handing the result back to the ad platforms
A dashboard tells you what worked. Sending the same facts back to Google and Meta lets their bidding learn what worked, which is where the money moves. The plumbing changed this year. Google's help page on enhanced conversions for leads, as read in October 2026, says: "Starting June 15, 2026, offline conversions import and enhanced conversions for leads uploads will be migrated to the Data Manager API and blocked in the Google Ads API." A custom app built now should upload booked and completed jobs the way Google currently asks, and it should be easy to change when Google asks again.
Meta has its own route. Meta's developer documentation, as read in October 2026, describes its Conversions API as a connection from "an advertiser's server, website platform, mobile app, or CRM to Meta systems." Your app is that server. Local Services Ads are more limited: Google's Ads API documentation, as read November 10, 2026, describes "Read-only report resources" for lead data, so we can bring those leads onto the screen as a report, not promise a live feed.
A sample month, read the way an owner should read it
The figures below belong to an invented company. They are here to show the arithmetic, not to suggest what your channels will do. Cost per booked job is spend divided by booked jobs; booking rate is booked jobs divided by leads.
| Source | Spend | Leads | Booked jobs | Booking rate | Cost per booked job |
|---|---|---|---|---|---|
| Google search ads | $3,000 | 120 | 48 | 40% | $62.50 |
| Local Services Ads | $1,500 | 50 | 30 | 60% | $50.00 |
| Postcards to past customers | $1,200 | 18 | 9 | 50% | $133.33 |
| Unpaid search and Business Profile | Not counted as spend | 70 | 35 | 50% | Not comparable |
| Referrals | $0 | 20 | 16 | 80% | Not comparable |
- 1
Read booking rate before cost
A source with a weak booking rate may be fine and the office may be the problem. Listen to ten unbooked calls before cutting a budget.
- 2
Then read cost per booked job
In the example, postcards look expensive per job. That is where the next step matters.
- 3
Then read revenue per source
If those nine postcard jobs were mostly system replacements, the dearest channel per job may be the best per dollar. Only the invoice data can say.
- 4
Then wait a month before acting
Replacements sold from an estimate land weeks after the call. Judge a channel on two or three months, credited back to the month the lead arrived.
What the marketing module costs to build and to run
The marketing dashboard is from $575 to build, depending on complexity, as of November 2026, with a fixed written estimate before work starts. A screen reading your own leads, jobs and invoices plus one ad platform sits near the floor. Several ad accounts, offline conversion uploads and call tracking built from scratch push it up. Hosting and maintenance are from $55 a month. Tracking numbers and call minutes are billed at carrier cost. Connecting the dashboard to ServiceTitan while both run, or to an ad platform's API, goes live the same day.
The dashboard sits beside the owner's KPI screen, which carries cost per booked job as one of its ten numbers. Getting the tracking itself right is the work of our conversion tracking setup service. If you want to see how your total software bill compares before deciding anything, the savings calculator takes your own figures, the build itself falls under our web app development service, and the full module list shows what else an app of your own can hold.
Who should build this, and who should wait
Wait, or rent, if
- You spend little on paid channels and most work comes from referrals
- Your calls are not tracked by source yet; fix that first or the dashboard has nothing to join
- You are keeping ServiceTitan with Marketing Pro and it already reports what you need
- Nobody will move budget based on what the screen says
Build, if
- You run several paid channels and cannot say which one books jobs
- You are replacing ServiceTitan and want the source to follow the job into your own database
- You want booked and completed jobs sent back to Google and Meta from your own system
- You want one screen that ends at collected revenue, not at clicks
DataCram is a San Antonio web studio that has been building for the web since 1999, and we also run PPC advertising for clients, so we know which numbers an ad account can and cannot give you. Our free map pack audit checks the Business Profile, the unpaid source in the sample table that nobody budgets for, and our work shows what we have built. Start at the section hub for the full case, or call (210) 346-0848 and describe where your leads come from today.
Questions owners ask about replacing ServiceTitan
Divide what you spent on a source in a period by the jobs booked from leads that source produced in the same period. Count booked jobs, not leads or clicks, and record the source when the lead arrives, through tracking numbers, form fields and booking records. Judge over two or three months, because large jobs sell weeks after the first call.
Yes, if the app stores the Google click ID with each lead. Google's help center says offline conversion and enhanced conversions for leads uploads moved to the Data Manager API starting June 15, 2026, so a current build uses that route. The upload tells Google which clicks became booked or completed jobs, which helps its bidding.
Give each offline channel its own tracking phone number or short web address, enter its cost as spend, and ask new customers how they found you with a fixed menu at booking. Some blur remains, because people see a truck and then search your name. A good dashboard labels that as unknown rather than guessing.
For a contractor whose work arrives mostly by phone, yes, because a call carries no source unless the number does. You can rent call tracking or build it into your app with numbers billed at carrier cost; see our call tracking module. Without it, the dashboard can count forms and bookings but not the phone.
As a report, yes. Google's Ads API documentation, read November 10, 2026, describes read-only report resources for Local Services Ads leads and lead conversations, and says creating or changing those campaigns is not supported through the API. We bring the data onto the dashboard; we do not promise a real-time push.
From $575 to build, depending on complexity, as of November 2026, with a fixed written estimate before work starts. One ad platform and your own job data sit near the floor; several platforms, conversion uploads and built-in call tracking push it up. Hosting and maintenance are from $55 a month, and tracking numbers bill at carrier cost.
Keep reading
- Module: KPI dashboardA Field Service KPI Dashboard Built on Your Own Data: Ten Numbers, One Screen, No Package UpgradeThe ten numbers an HVAC or plumbing owner acts on, each defined and built from your own database on one screen. From $575 to build, by complexity.
- Module: call trackingCall Tracking Software for Home Services That Follows Each Call to the Paid InvoiceTracking numbers per source, calls matched to booked jobs and invoices, Telnyx numbers at carrier cost, and CallRail's published prices as a yardstick.
- Attribution, case by caseThe Case of the Unattributed Furnace: Tracing Every ServiceTitan Job Back to What Paid for ItWhy "source: website" tells you nothing, how to tie every ServiceTitan lead to a campaign and its revenue, and a sample monthly report you can copy.
- The offer, in fullCustom Field Service Software, Priced by the Module and Owned by the Company That Pays for ItCustom field service management software built one module at a time: from $575 each, a fixed written estimate, hosting from $55 a month, code you own.
- Module: online bookingReal-Time Online Booking for HVAC and Plumbing Shops, Read Straight From Your Own ScheduleOnline booking that reads open windows from your own schedule and writes the job straight to it: the rules, what Google allows, and the price from $575.
- Module: chat widgetAI Chat for Contractor Websites That Answers From Your Own Pages and Books the VisitA website chat that answers from your own pages and books the job: Kairos prices as of November 2026, what it refuses to say, and what ServiceTitan offers.
- Everything in ServiceTitan AlternativeSee the section
From the Insights desk
- The Garage Door, Locksmith and Appliance Repair Website: The First Five SecondsSomeone locked out, trapped behind a broken garage door or staring at a warm fridge gives your website about five seconds on a phone. What the first screen must show for each trade, and the speed, trust and booking that back it up.
- Housecall Pro, Jobber or ServiceTitan: What Changes on Your WebsiteThe software you pick for the office decides what your Book Now button does, what a form creates and where a lead's source gets written down. What changes on the website with Housecall Pro, Jobber or ServiceTitan, and what never does.
Find out which source books your jobs
Tell us your channels and what you track today. A person at DataCram replies with where your attribution chain breaks and what a dashboard would cost to close it.
Which of these sounds like you? (pick any)
Rather talk now? Call (210) 346-0848.